multi-layer chip inductors - ceramic ctparts.com ver. 8.3 manufacturer of inductors, chokes, coils, beads, transformers & toroids 800-684-5322 inside us 949-453-1811 outside us copyright ? 2003 by ct magnetics, dba central technologies. all rights reserved. ct magnetics reserves the right to make improvements or change specifications without notice central technologies 16 12.14.01 size a b c d mm 0.60.03 0.30.03 0.30.03 0.1~0.2 inches 0.020.001 0.010.001 0.010.001 0.004~0.008 physical dimensions specifications l test q q test srf dcr dcr idc part inductance freq. fact freq. typ. max. typ. max. number (nh) (mhz) min. (mhz) (mhz) ( ? ? )( ? ? ) (ma) ct0201-1n0s 1.0 100 5 100 7000 .12 .06 300 ct0201-1n2s 1.2 100 5 100 6800 .15 .10 300 ct0201-1n5s 1.5 100 5 100 6500 .18 .12 300 ct0201-1n8s 1.8 100 5 100 6300 .22 .14 290 ct0201-2n2s 2.2 100 5 100 6000 .26 .15 270 ct0201-2n7s 2.7 100 5 100 5600 .32 .17 270 ct0201-3n3_* 3.3 100 5 100 5300 .38 .19 240 ct0201-3n9_* 3.9 100 6 100 5000 .45 .23 210 ct0201-4n7_* 4.7 100 6 100 4400 0.5 .27 210 ct0201-5n6_* 5.6 100 6 100 4200 0.6 .29 210 ct0201-6n8_** 6.8 100 6 100 3800 0.7 .30 210 ct0201-8n2_** 8.2 100 6 100 3500 0.9 .52 200 ct0201-10n_** 10 100 6 100 3100 1.2 .58 200 ct0201-12n_** 12 100 6 100 2800 1.3 0.6 190 ct0201-15n_** 15 100 6 100 2500 1.4 0.7 130 ct0201-18n_** 18 100 6 100 2200 1.5 0.8 120 ct0201-22n_** 22 100 6 100 1800 1.8 1.0 110 ct0201-27n_** 27 100 6 100 1600 2.0 1.2 100 ct0201-33n_** 33 100 6 100 1400 2.3 1.5 100 ct0201 series from 1.0 nh to 33 nh not shown at actual size. characteristics description: ceramic core, multi-layer chip inductor for high frequency applications: portable telephones, pms, pagers and miscellaneous high-frequency circuits operating temperature: -40c to +100c inductance tolerance: 0.3nh, 5%, 10% testing: inductance and q are tested on an hp4287a at 100 mhz packaging: tape & reel marking: reels are marked inductance code and tolerance additional information: additional electrical & physical information available upon request samples available. see website for ordering information. please specify tolerance code when ordering. ct0201-3n3_ s = 0.3nh, j = 5%, k = 10% * s or k only ** j or k only
|
